What Are the Minimum Order Quantities for Printed Cans?

⚞ The Highlights:

  • Each minimum is built from full pallet layers: 5 layers of 389 cans (12 oz standard), 4 layers of 506 (12 oz sleek), or 4 layers of 389 (16 oz standard).
  • Can ends (lids) are ordered to match your cans, in sleeves of 580, rounded up to a full sleeve.
  • Several designs can share a pallet if you tell us the order you need them in.
  • A minimum order is a little over a quarter of a full pallet, or about six barrels of liquid.

The minimum order for digitally printed cans at Blue Label is 1,945 cans for 12 oz standard, 2,024 cans for 12 oz sleek, and 1,556 cans for 16 oz standard. Those numbers might look strange, but they’re based on the number of full layers of cans on a pallet.

Once you see how cans are packed, the minimums make sense and they’re easier to plan around. This post walks through the math, plus the quantities that come along with a printed can order: lids, full pallets, and the floor space to hold them.

Minimum Order Quantities for Digitally Printed Cans by Can Size

Can size Minimum order How it’s built
12 oz standard 1,945 cans 5 layers x 389 cans per layer
12 oz sleek 2,024 cans 4 layers x 506 cans per layer
16 oz standard 1,556 cans 4 layers x 389 cans per layer

We offer price breaks depending on total yearly volumes. Once a flagship beverage is selling steadily and you’re reordering the same design several times a year, that volume conversation is worth starting.

Why Printed Can Minimums Are Set by Pallet Layers

Empty cans ship on a pallet in flat levels. A pallet layer is one of those levels: a few hundred cans packed side by side, with a thin sheet laid over them before the next layer goes on.

Side-view diagram of a pallet of empty cans, showing the base pallet at the bottom, stacked layers of cans with a tier sheet between each layer, and a top frame on top. One layer is highlighted and labeled as a single pallet layer.

How many cans fit in a layer depends on how wide the can is. A 12 oz standard can and a 16 oz standard can have the same diameter, so both fit 389 to a layer. The 16 oz can is just taller. A 12 oz sleek can is narrower, so 506 of them fit in the same space.

The pallet, the sheets between layers, and the frame on top are all reusable, and they come back to us after your cans are filled.

How Many Printed Cans Fit on a Full Pallet?

The table below puts each minimum next to a full pallet, so you can picture how much space and liquid an order involves. Most smaller orders ship LTL (less than truckload), meaning your pallets ride on a shared truck with other freight rather than filling a trailer by themselves.

These are the full-pallet counts for LTL shipments:

Can size Minimum order Full LTL pallet Minimum as part of a pallet Liquid to fill the minimum
12 oz standard 1,945 cans 7,002 cans (18 layers) 5 of 18 layers About 182 gallons (about 6 barrels)
12 oz sleek 2,024 cans 7,084 cans (14 layers) 4 of 14 layers About 190 gallons (about 6 barrels)
16 oz standard 1,556 cans 5,446 cans (14 layers) 4 of 14 layers About 195 gallons (about 6 barrels)

How Can Ends (Lids) Are Ordered With Printed Cans

In most cases, you’ll order can ends (the lids that get seamed on after filling) to match your can order. Ends come packed in sleeves of 580, and we sell them by the full sleeve, so your end count rounds up to the nearest whole sleeve.

Quick example: You order 4,000 cans. Divide 4,000 by 580 and you get about 6.9, so you’d order 7 sleeves. That’s 4,060 ends for 4,000 cans.

Our standard ends come in three looks: silver, black with a black tab, and gold with a silver tab.

Worth knowing: Other end colors, custom colored tabs, and specialty tabs (like laser-etched or embossed tabs) are possible through a special request to the supplier. They come with a much larger minimum commitment and a longer lead time than our standard ends, so bring them up early if they’re part of your launch plan.

Three standard beverage can ends side by side: silver with a silver tab, black with a black tab, and gold with a silver tab.

Can You Mix Several Designs on One Pallet of Printed Cans?

Yes. If you’re ordering several designs, we can build them onto a mixed pallet. Tell us the order you want the designs to come off the pallet, and we’ll stack them to match.

Stacking orders saves your team time when you fill. Say you’re canning your lager in the morning and a seasonal in the afternoon. With the lager layers on top, your crew pulls cans in the order they need them instead of unstacking and restacking to reach the right design. When you place a mixed order, share your fill schedule with your rep and we’ll plan the pallet around it.

How Digital Printed Can Minimums Compare to Offset Cans, Labels, and Shrink Sleeves

Option Typical minimum What it means for your order
Digitally printed cans (Blue Label) 1,556 to 2,024 cans per order, depending on can size Printed cans arrive ready to fill
Offset printed cans Truckload scale, often hundreds of thousands of cans per design Lowest cost per can at high volume, but a lot of inventory to buy and store
Labels on blank cans Much smaller quantities You also buy blank cans and apply labels
Shrink sleeves on blank cans Much smaller quantities You also buy blank cans and get sleeves applied

Offset printed cans have to be set up on the press before it runs, and can makers sell printed cans by the truckload. A truckload of standard 12 oz cans is roughly 200,000 cans, and some can makers have required several truckloads per design, as Brewing Industry Guide reported.

Labels and shrink sleeves go on blank cans you buy separately, and they can be ordered in much smaller quantities. We see brands use them for very small batches, one-off releases, and lineups with lots of rotating designs. Our post on when your brand is ready for printed cans walks through where each option fits, and we line them up side by side in printed cans vs. shrink sleeves and labels.

Talk Through Your First Printed Can Order With Us

If you’re working out how many cans to start with, we can help you map it out: which designs, which can sizes, how many sleeves of ends, and how it all stacks onto pallets for your fill dates. Reach out to our team and let’s figure out the right order for your lineup.

Author

  • Pat Seesholtz
    Senior Business Developer

    Pat is a Senior Business Development Manager at Blue Label Packaging Company, where he’s spent 11+ years building trust-based partnerships that drive revenue in digital packaging. He brings a track record of leadership and communication developed through multiple coaching roles alongside his business development career.